Plasma Systems - HySpeed HSD130
 |
HySpeed Plasma HSD130 is an easy-to-use oxygen plasma system that is more productive and more cost-effective than other metal cutting solutions such as oxy fuel, air plasma, and non-LongLife oxygen plasma systems.
Virtually dross-free cutting capacity - mild steel 5/8" (16 mm) Production pierce capacity - mild steel 1" (25 mm) Maximum cutting capacity (edge start) - mild steel 1 1/2" (38 mm) |
| Capacity | ||
|---|---|---|
| Mild Steel | Dross Free Productions (pierce) Severance (edge starts) |
5/8" (16 mm) 1" (25 mm) 1 1/2" (38 mm) |
| Stainless Steel | Production (pierce) Severance |
3/4" (20 mm) 1" (25 mm) |
| Aluminum | Production (pierce) Severance |
3/4" (20 mm) 1" (25 mm) |
| Speed | ||
| Mild Steel | Optimum Quality | 1/2" (12 mm)
2200 mm/m (80 ipm) |
| Cut Angle | ISO 9013 Range** | 4 |
| Weldability | Ready To Weld | |
| Process Gases By Material | ||
| Plasma/Shield | Mild Steel
Stainless Steel Aluminum |
02/Air, Air/Air
Air/Air, N2/N2, f5/N2, H35/N2 Air/Air, H35/N2 |
| Process Amps | Not All Processes Available For All Materials | 45-130 |
| *Note:Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster. **ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in 5. |
||
Ease Of Use
Easiest plasma system available on the market for oxygen and air plasma cutting - easy to install, easy to run, easy to troubleshoot.
- Diagnostics display greatly simplifies troubleshooting and service, which leads to greater up-time for you.
- Fewer consumable parts and quicker consumable change out means reduced downtime.
Incredibly Productive
With the fastest cut speeds in this class, rapid pierce, and minimal secondary operations, you will be more productive.
- Patented LongLife technology significantly improves consumable life for both oxygen and air processes.
- 100% duty cycle for the most demanding production requirements.
- Fastest cut speed per amp compared to its closest competitors.
Unmatched Reliability
Rigorous, extensive testing, backed by four decades of experience, guarantees the Hypertherm quality you know you can count on.
- Endured rigorous reliability and exhaustive life testing procedures equivalent to over 10 years of use in operating environments from -10°C to +40°C (+14°F to +104°F).
- Dramatically reduced number of internal parts; less than half compared to other systems on the market. Studies have shown that fewer parts directly relates to greater reliability.
- Designed for easy access to components and simplified service, to keep you up and running.
- Self-diagnostics are performed automatically at startup and continually throughout the cutting process. This ensures the system is operating at peak performance.
Cost Effective
Ease of use, reliability, and productivity all add up to a more cost-effective system than other metal cutting solutions.
- Less rework and more parts per hour mean lower cost per cut.
- LongLife technology means our consumables last longer, so your consumable cost per part is lower.
